Additive Manufacturing of Ceramics from Preceramic Polymers Paolo Colombo (University of Padova, Italy) Tailoring Powder Properties for the Light Based Volumetric Additive Manufacture of Ceramics Jens Günster (BAM - Bundesanstalt für Materialforschung und -prüfung, Germany) Simulation of Molten Pool Behavior in Wire Arc Additive Manufacturing Process Using Rotary Torch by Particle Method Hisaya Komen (Osaka University, Japan) Solidification Cracking Susceptibility of Alloy 718 During Powder Bed Fusion Process Kota Kadoi (Osaka university, Japan) Exploring the Synergy of AI Design and ECAM Additive Manufacturing for Thermal Enhancement of Ceramic Substrates Memo Romero (Fabrica8Labs, USA) Crystallization-assisted Additive Manufacturing for Hierarchical Porous Ceramics Using Digital Light Processing Gyu-Bin Choe (Korea University, Korea) Enhancement of Printing Accuracy of Ceramics through a Novel Flashing Process Shakeel Abbas (University of Science and Technology, Korea) SESSION II 11 April 2024 Strategically Aligned Additive Manufacturing: Disruptor to Global Supply Chains and Enabler of Sustainable Societal Development Mrityunjay Singh (Global Alliance for Technology and Society, USA) Research and Development on Materials and Processes of LTCC for Microwave Devices Yasutaka Sugimoto (Murata Manufacturing Co., Ltd., Japan) High Precision Ceramic Processing for ASML Lithography Systems Markus Eberstein (ASML, Germany) Additive Manufacturing Using 2D Nanosheets Minoru Osada (Nagoya University, Japan) Cold Crystallization, Morphology Control and Facet Control of Metal Oxide Nano-materials in Aqueous Solutions for Gas Sensors and Chemical Sensors Yoshitake Masuda (AIST - National Institute of Advanced Industrial Science and Technology, Japan) Dielectric Properties of Co-doped CaTiSiO5 Ceramics for High Temperature Capacitors Zhifu Liu (Shanghai Institute of Ceramics, Chinese Academy of Sciences, China) Digital Light Processing-based Multi-material 3D Printing with Ti6Al4V and Hydroxyapatite Chang Woo Gal (Korea Institute of Materials Science, Korea) Development of Ceramics Binder Jetting Technology that Achieves Both Parts Density and Thickness Kiichi Kamoda (RICOH Ltd., Japan) High Speed Additive Manufacturing with Muti-Beam Laser Metal Deposition Yuji Sato (Osaka University, Japan) Packaging Technology Trends for High Power Semiconductor Power Module with Ceramic Substrate Fumiyoshi Kawashiro (Toshiba Electronic Devices & Storage Corporation, Japan) Transparent Feedstocks for Photon-based Additive Manufacturing Technologies for Powder Processing of Ceramics Johanna Sänger (Montanuniversität Leoben, Austria) Fabrication of Functionally Graded Multi-ceramic Structure using Digital Light Processing (DLP) 3D Printing Technique with Passive In-line Mixing Concept Gyunam Kim (Korea University, Korea) SESSION III 12 April 2024 Multi Materials Additive Manufacturing Alexander Michaelis (Fraunhofer Institute for Ceramic Technologies and Systems, IKTS, Germany) Crystallographic Texture Control and Functionalization by Metal Additive Manufacturing Takayoshi Nakano (Osaka University, Japan) Dissimilar Joining using Metallurgical Dealloying Reaction Hidemi Kato (Tohoku University, Japan) Ceramics Stereolithography that Requires a Variable Approach Depending on Raw Material Characteristics Hui-suk Yun (KIMS - Korea Institute of Materials Science, Korea) AI-Determination for Manufacturing Process and Engineering Property of Silicon Nitride Ceramics Manabu Fukushima (AIST - National Institute of Advanced Industrial Science and Technology, Japan) Dentistry with 3D Printing in Dental Applications Kumiko Yoshihara (AIST - National Institute of Advanced Industrial Science and Technology, Japan) Controlled Hydrolysis in Polyol for 2D Multi-element Hydroxides Hiroya Abe (Osaka University, Japan) Introduction of Ceramic 3D Printers and Models Manufactured with them, and Proposing Possibilities for the Future Sachiko Fujii Hayashi (SK Fine Co., Ltd, Japan) Tailoring and Mechanical Validation of 3D Printed Ceramics via Lithography-based Ceramic Manufacturing Johanna Sänger (Montanuniversität Leoben, Austria) Continuous Layer Deposition for the Additive Manufacturing of Ceramics by Layerwise Slurry Deposition (LSD-print) Andrea Zocca (BAM - Bundesanstalt für Materialforschung und -prüfung, Germany) Geometry Exploration for Functional and Structural Applications in Ceramic Stereolithography by Finite Element Analysis Spirrett Fiona (Osaka University, Japan) Stereolithographic Additive Manufacturing of Dielectric Components with Multiplex Structural Dimensions Soshu Kirihara (Osaka University, Japan) − 460 −
元のページ ../index.html#462