参考文献 1) ISO 14577-1. Metallic Materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method, second edition (2015). 2) W.C. Oliver and G.M. Pharr, Jour. Mater. Research 19 (2004) 3. 3) J. Ruzic, S. Emura, X. Ji, and I. Watanabe, Mater. Sci. Eng. A 718 (2018) 48. 4) T. Matsuno, R. Ando, N. Yamashita, H. Yokota, K. Goto, and I. Watanabe, Int. J. Mech. Sci. 180 (2020) 105663. 5) R. Ando, T. Matsuno, T. Matsuda, N. Yamashita, H. Yokota, K. Goto, and I. Watanabe, ISIJ Int. 61 (2021) 473-480. 6) I. Watanabe, Z. Sun, H. Kitano, and K. Goto, Sci. Tech. Adv. Mater. 21 (2020) 461-470. 7) Y. Chen, E. Hintsala, N. Li, B.R. Becker, J.Y. Cheng, B.W.J. Nowakowski, D. Stauffer, N.A. Mara, JOM. 71 (2019) 3368. 8) A. Ikeda, K. Goto, T. Osada, I. Watanabe, and K. Kawagishi, Scripta Mater. 193 (2021) 91. 9) Y. Cheng and C. Cheng, J. Mater. Res. 14 (1999) 3493. 10) K.K. Tho, S. Swaddiwudhipong, Z.S. Liu, K. Zeng and J. Hua, J. Mater. Res. 19 (2004) 2498. 11) M. Futakawa, T. Wakui, Y. Tanabe, and I. Ioka, J. Mater. Res. 16 (2001) 2283. 12) N. Chollacoop, M. Dao, and S. Suresh, Depth-sensing instrumented indentation with dual sharp indenters. Acta Mater. 51 (2003) 3713. 13) B. Taljat, T. Zacharia, and F. Kosel, Int. J. Solids Struct. 35 (1998) 4411. 14) J.-H. Ahn and D. Kwon, J. Mater. Res. 16 (2001) 3170. 15) K. Goto, I. Watanabe, and T. Ohmura, Inter. Jour. Plast. 116 (2019) 81. 16) K. Goto, I. Watanabe, and T. Ohmura, Mater. Des. 194 (2020) 108925. 17) J. Ruzic, I. Watanabe, K. Goto, and T. Ohmura, Mater. Trans. 60 (2019) 1411. − 181 −
元のページ ../index.html#183