5) H. Somekawa ：Effect of Alloying Elements on Fracture Toughness and Ductility in Magnesium Binary Alloys: A Review, Mater. Trans., Vol.61, (2020), 1-13. 6) H. Miura and W. Nakamura：Microstructure and Mechanical Properties of Mg-8Al Alloy Fabricated by Room Temperature Multi-Directional Forging, Phil. Mag., Vol.93, (2013), 601-607. 7) J. Xing, X. Yang, H. Miura and T. Sakai ：Mechanical Properties of Magnesium Ally AZ31 after Severe Plastic Deformation, Mater. Trans. J, Vol.49, (2008),69-75. 8) H. Watanabe, A. Takara, H. Somekawa, T. Mukai and K. Higashi：Effect of Texture on Tensile Properties at Elevated Temperatures in an AZ31 Magnesium Alloy, Scr. Mater., Vol.52, (2005), 449-454. 9) M. Kai, Z. Horita, T. G. Langdon：Development Grain Refinement and Superplasticity in a Magnesium Alloy Processed by High-Pressure Torsion, Mater. Sci. Eng. A., Vol.488, (2008), 117-124. 10) H. Zhang, Z. Xu, S. Yarmolenko, L. Kecskes and J. Sankar：Evolution of Microstructure and Mechanical Properties of Mg-6Al Alloy Processed by Differential Speed Rolling upon Post-Annealing Treatment, Metals, Vol.11, (2021), 926. 11) 戸田裕之, 小林俊郎, 和田義治, 井上直也：破壊力学シミュレーションによる金属基複合材料の破壊じん性評価とミクロ組織制御法の提案, 日本金属学会誌, Vol.59, (1995), 198-205. 12) H. Toda, T. Kobayashi and A. Takahashi：Mechanical Analysis of Toughness Degradation Due to Premature Fracture of Course Inclusions in Wrought Aluminium Alloys, Mater. Sci. and Eng. A, Vol.280, (2000), 69-75. 13) T. Kobayashi, I. Yamamoto and M. Niinomi：On the Accuracy of Measurement of dynamic Elastic-Plastic Fracture Toughness Parameters by the Instrumented Charpy Test, Eng. Frac. Mech., Vol.26, (1987), 83-94. 14) 吉田総仁：弾塑性力学の基礎, (1997), 117, 共立出版 15) 三浦博己・松本洸太・小林正和：金型を用いた降温多軸鍛造AZ61Mg合金の組織と機械的性質,日本金属学会誌, Vol.79,(2015),295-302. 16) 小林俊郎：計装化シャルピー衝撃試験における進歩, 材料,Vol.51,(2002),771-779. 17) 小林俊郎：先端材料の強度と靱性の展望, ふぇらむ, Vol.4,(1999),468-473. 18) 小林俊郎：アルミニウム合金の強度と破壊の研究, 軽金属,Vol.54,(2004),333-347. 19) 成田舒孝：金属・合金における双晶変形,日本金属学会会報,Vol.24,(1985),984-982. 20) 小池淳一・宮村剛夫：多結晶マグネシウム合金における塑性変形の微視的機構,軽金属,Vol.54,(2004), 460-464. 21) H. Yamada, T. Kami N. Ogasawara：Effects of Testing Temperature on the Serration Behavior of an Al-Zn-Mg-Cu alloy with Natural and Artificial Aging in Sharp Indentation, metals, Vol.10, (2020),597. 22) M. Pozuelo, Y. W. Chang, J. Marian, J. M. Yang ：Serrated Flow in Nanostructured Binary Mg-Al Alloys, Scr., Mater., Vol. 127, (2017), 178-181. 23) W. H. Wang, D. Wu, S. S. A. Shah, R. S. Chen, C. S. Lu：The Mechanism of Critical Strain and Serration Type of the Serrated Flow in Mg-Nb-Zn Alloys, Mater., Sci., and Eng. A, Vol. 649, (2016), 214-221. 24) 三浦博己，小林正和：冷間多軸鍛造マグネシウム合金の組織と特性, まてりあ, Vol.54, (2015), 105-109. 25) 須藤海志，松中大介，染川英俊：ナノインデンテーションによるマグネシウムの粒界近傍での局所塑性特性, 日本金属学会誌, Vol.85, (2021), 1-6. 26) 東郷敬一郎：材料強度解析学, (2004),92.内田老鶴圃 - 44 -
元のページ ../index.html#46