■■■■■■■■■■■■■■■■■■■■■■■■3(c)■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■100■■■■■■■■124■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■CGH■■■■■■■■■■■■■■ 5.今後の展開 ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■0.99fffi■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■‣■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ 謝 辞 ■■■■■■■■■■■■■■■■ ■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■ 参考文献 1) Y. Hayasaki, T. Sugimoto, A. Takita, and N. Nishida, “Variable holographic femtosecond laser processing by use of a spatial light modulator,” Appl. Phys. Lett. 87, 031101 (2005). 2) N. Sanner, N. Huot, E. Audouard, C. Larat, J. P. Huignard, and B. Loiseaux, “Programmable focal spot shaping of laser pulses,” Opt. Lett. 30, amplified femtosecond 1479-1481 (2005). 3) S. Hasegawa, Y. Hayasaki, and N. Nishida, “Holographic femtosecond laser processing with multiplexed phase Fresnel lenses,” Opt. Lett. 31, 1705-1707 (2006). 4) Z. Kuang, W. Perrie, J. Leach, M. Sharp, S. Edwardson, M. Padgett, G. Dearden, and K. Watkins, “High throughput diffractive multi-beam femtosecond laser processing using a spatial light modulator,” Appl. Surf. Sci. 255, 2284-2289 (2008). 5) Z. Kuang, D. Liu, W. Perrie, S. Edwardson, M. Sharp, E. Fearon, G. Dearden, and K. Watkins, “Fast parallel diffractive multi-beam surface micro-structuring,” Appl. Surf. Sci. 255, 6582-6588 (2009). 6) M. Yamaji, H. Kawashima, J. Suzuki, and S. Tanaka, “Three-dimensional micromachining inside a transparent material by single pulse femtosecond laser through a hologram,” Appl. Phys. Lett. 93, 041116 (2008). 7) M. Yamaji, H. Kawashima, J. Suzuki, S. Tanaka, M. Shimizu, K. Hirao, Y. Shimotsuma, and K. Miura, “Homogeneous and elongation-free 3D microfabrication by a femtosecond laser pulse and hologram,” J. Appl. Phys. 111, 083107 (2012). 8) M. K. Bhuyan, F. Courvoisier, P. A. Lacourt, M. Jacquot, R. Salut, L. Furfaro, and J. M. Dudley, “High aspect ratio nanochannel machining using single shot femtosecond Bessel beams,” Appl. Phys. Lett. 97, 081102 (2010). 9) A. Jesacher and M. J. Booth, “Parallel direct laser writing in three dimensions with spatially dependent aberration femtosecond laser correction,” Opt. Express 18, 21090-21099 (2010). 10) A. P. Cumming, A. Jesacher, M. J. Booth, T. Wilson, and M. Gu, for three-dimensional micro-fabrication of photonic crystals in lithium niobate,” Opt. Express 19, 9419-9425 (2011). 11) H. Takahashi, S. Hasegawa, 12) K. Chaen, H. Takahashi, S. Hasegawa, and Y. Hayasaki, the spatial “Display method with compensation of frequency response of a light modulator for holographic femtosecond laser processing,” Optics Commun. 280, 165-172 (2007). 13) S. Hasegawa and Y. Hayasaki, “Adaptive optimization of hologram in holographic femtosecond laser processing system,” Opt. Lett. 34, 22-24 (2009). 14) S. Hasegawa and Y. Hayasaki, “Performance analysis of adaptive optimization of multiplexed phase Fresnel lenses,” Jpn. J. Appl. Phys. 48, 09LE03 (2009). 15) S. Hasegawa and Y. Hayasaki, “Second harmonic optimization of computer-generated hologram,” Opt. Lett. 36, 2943-2945 (2011). 16) V. R. Daria, C. Stricker, R. Bowman, S. Redman and, H. A. Bachor, “Arbitrary multisite two-photon excitation in four dimensions,” Appl. Phys. Lett. 95, 093701 (2009). 17) L. Kelemen, S. Valkai, and P. Ormos, “Parallel photopolymerisation with complex light patterns generated by diffractive optical elements,” Opt. Express 15, 14488-14497 (2007). 18) H. Takahashi, S. Hasegawa, A. Takita, and Y. Hayasaki, “Sparse-exposure technique in holographic two-photon polymerization,” Opt. Express 16, 16592-16599 (2008). 19) K. Obata, J. Koch, U. Hinze, and B. N. Chichkov, “Multi-focus two-photon polymerization technique based on individually controlled phase modulation,” Opt. Express 18, 17193-17200 (2010). 20) S. D. Gittard, A. Nguyen, K. Obata, A. Koroleva, R. J. Narayan, and B. N. Chichkov, “Fabrication of microscale medical devices by two-photon polymerization with multiple foci via a spatial light modulator,” Biomed. Opt. Express 2, 3167-3178 (2011). 21) Y. C. Li, L. C. Cheng, C. Y. Chang, C. H. Lien, P. J. Campagnola, and S. J. Chen, “Fast multiphoton microfabrication of freeform polymer microstructures by spatiotemporal focusing and patterned excitation,” Opt. Express 20, 19030-19038 (2012). 22) C. Mauclair, G. Cheng, N. Huot, E. Audouard, A. Rosenfeld, I. V. Hertel, and R. Stoian, “Dynamic ultrafast laser spatial tailoring for parallel micromachining of photonic devices in transparent materials,” Opt. Express 17, 3531-3542 (2009). 23) M. Sakakura, T. Sawano, Y. Shimotsuma, K. Miura, and K. Hirao, “Parallel drawing of multiple bent optical waveguides by using a spatial light modulator,” Jpn J. Appl. Phys. 48, 126507-126511 (2009). 24) M. Sakakura, T. Sawano, Y. Shimotsuma, K. Miura, and K. “Adaptive aberration femtosecond laser liquid crystal spatial compensation and Y. Hayasaki, “Holographic using optimal-rotation-angle method with compensation of spatial frequency response of liquid crystal spatial light modulator,” Appl. Opt. 46, 5917-5923 (2007). processing - 58 -
元のページ ../index.html#60